How to Build a Soakaway System for RV Parks

By Ann Hills / 3 years ago
RV Parks

The construction of a Soakaway is an effective method used for low environmental RV parks as it uses fewer construction materials. Recreational vehicles (RV) are becoming popular as many families are using them during their vacations to reduce hotel expenses. And thanks to technological advancements, some people have to make RV to be their full-time homes and work comfortably during their trip. It implies that they have to need a place to park them. If you are planning to begin an RV park business, you must ensure the amenities provide, the location, the legal requirements needed, and the availability of space. Since RV will need some cleaning to maintain hygiene in the park, there is a necessity of building a Soakaway that allows percolation of water back to the earth’s surface.

There are different regulations and legalities of making an RV park and the use of a soakaway system being part of the rules. In the article below, we look at how to build the system.

Planning soakaway construction

The type of soil where you plan to start your RV park should be in a granular surrounding. It is because granular soil is considered to have good drainage. More so, if you choose to place your RV in a clay environment, it's like building a pond in your park as its particles adsorb water.

Why you should build a soakaway system

Building a drainage system should be considered in a waterlogged environment, standing water that is building up against your house walls, and so on. A soakaway system helps to remove surface water, damping and to prevent water damage to the building or the RVs for your business. More so, it provides a SUDS (sustainable urban drainage system) which complies with the building regulations.

How you build a Soakaway

Planning is essential before any construction. Building a soakaway requires planning to ease the construction job and also avoid simple mistakes that could have an impact on your RV Parks business. Moreover, checking on the construction requirements for you to start a drainage system for the Local Building Construction is necessary not forgetting the RV park creations requirements and legislation. Also, if you are planning for hard landscaping in your RV park and you need to provide a SUDS, then you should apply and understand the planning policy statement before anything.

● Where to dig your soakaway

Depending on the locality of your RV park, Local building construction authorities require that the system has to construct at least 5 meters from any suitable building including the recreational vehicles. The perfect location is on the lower part of the land as you will have to dig less compared on the upper part. More so, drilling on the lower part of the property means you will not require longer and larger pipes or bending pipes. That implies that you will also not have to bother about pipes getting blocked as the chances will be minimal.

Apart from that, you should check on the placement of the water tables which gets done by digging an exploratory pit to ensure that the water table is below the required site for the soakaway.

● Land drainage pipe

The drainage pipes come in different sizes, shapes, and qualities which is why you should understand your RV park location before ordering one. The soakaway drainage pipes should be at least 75mm in diameter considered as a top priority. That is the minimum pipe requirement for a land drainage pipe, although 100 mm is the recommended size for construction. Go to EasyMerchants since they provide different pipe sizes and have better options for land drainage pipes including the soakaway crates that are also necessary. So to avoid inconveniences, you should get laid paperwork of 100 mm of drainage pipe for effectiveness.

● Trench digging

Shovel or hand can be used for trench digging or even hire a mini digger or professional digging company to dig you a park. The soakaway pipe should be at least 1 to 40 for a fall, which implies that for every 4 meters of paperwork, it should slope down by 100 mm. That is why for RV park construction you need at least ten campsites per acre with a ratio of one to one, i.e., one campground, one RV in the park. Moreover, it is recommended to assign a professional for trench digging due to the strict regulations for higher populate areas compared to loosely populated areas.

● Soakaway size

A soakaway should be a 1m x 1m x 1m just below the bottom of the incoming pipe. But for an RV park, it is independent of the total number of the camping site in your piece of land, the population of people and the amount of water in that soil. Apart from that, it depends on the rate of the water percolation rate of the ground and the amount of water that the soakaway will be processed in time. Which depends on the speed at which water will soak in the soil. Moreover, if you place soakaways of minimum sizes in your RV park, it will still work out equally all depending on the amount of water to get absorbed.

Hardcore needed

Same as placing a device underground and covering it completely, the hardcore should completely cover the pipe and at least be 100mm above it. It is because the RV has weights and there might be movements, so no matter the force of pressure on the pipe, your system will still be safe. More so, after the hardcore placement, consider placing an impervious layer like tarpaulin or concrete bed. After that, put topsoil on top of the impermeable layers to restore the garden level. At that point, you will not have tampered with the rate at which the pipe will absorb water.

Various types of pipes used in the construction of the soakaway system in the RV parks have different capabilities and comes from different materials. From the above descriptions, the soakaway system is essential to our environment as it is a proper drainage system that can help protect the soil layer. Since RV parks act as a replacement and home for many homes and hotels, conserving the environment around it requires a well-built soakaway system for efficiency.

About the author

Ann Hills

My name is Ann Hills and I am a food blogger and a yoga teacher. When I was a child, I often got around my mother and watched her cooking in our kitchen. My mom always says to me that: “Kitchen is the heart of any home”. I strongly believe in her saying that’s reason why I prefer spending my money to make my home better than other stuff.

Leave a comment: